Operation Manual

Testing inputs/ outputs

Inputs Outputs

ATTENTION !

The input elements have been carefully set by the manufacturer.

Settings and corrections must only be done by trained service

personnel.

Caution: Risk of injury !

Do not reach into the running machine during the function test.

Testing input elements

–

Change between the basic module (inputs S1 to S104) and the

CAN node (inputs SC101 to SC116) with the key “CAN”.

–

Tap the key “S?”.

The “numeric pad” is opened.

–

Enter the code number of the desired input element (see tables).

–

Tap the key “OK”.

–

Actuate the input element and check the switching state at the

display.

In the field 1 the designation and the switching state (+/-) of the

actuated input is displayed.

–

Tap the function key “ESC” to quit the menu.

NOTE !

It is also possible to test several inputs one after the other.