Operation Manual

6.3 Copying seam programs

Via this menu new seam programs can be generated or existing ones

can be overprinted.

The following steps are required:

1) Select a new seam program location (Example: Program No. 32).

2) Copy an existing program (Example: 1) to the new program location.

3) Adapt the seam parameters or seam functions of the new program

to your requirements.

Copying the seam program

ATTENTION!

Existing program settings are overwritten.

–

Tap “copy seam programs”.

–

Select new seam program location

(Example: Program No. 32).

–

Tap “source”.

The numeric pad appears.

–

Tap the number of the source program.

–

Tap “destination”.

The numeric pad appears.

–

Tap the number of the new program location.

–

Tap the “OK” key.

The data of program 1 are copied to the program location 32.