Operation Manual

Seam functions

The symbols in the middle of the right display half enable a quick

access to important parameters.

The operator can combine up to 18 parameters to be displayed in the

main screen (see also chapter __).

Example:

Centre knife switched on (on/ off)

Corner knives switched on (on/ off)

Stacker or ejector roller (on/ off)

Vacuum (automatic)

Tape feed (on/ off)

Holding stamp (on/ off)

Activate/ deactivate left flap clamp

Activate/ deactive right flap clamp

Activate/ deactivate light barriers

Feeding position (on/ off)

Zipper scissors and zipper unwinder (on/ off)

The functions and adjustments of the individual seam functions are

described more exactly in the chapters 5.4 (”Seam parameters”).

Further operating keys

Activate/ deactivate laser lamps

Threading key for needle thread (thread clamp)

Manual tape feed

Reset the daily piece counter