Installation Sheet
7 Nm / 5 ft-lbs.
70
 CAUTION
The hot valves can cause 
scalding
 > Avoid contact.
 > Attach supply lines to shutoff valves.
NOTICE
Leakage through wrong 
installed hoses
 > Make sure that hoses are not kinked or 
twisted during installation.
 > Tighten the screws maximum torque 
5 ft-lbs.
 > Assemble the O-ring over the hoses and 
then place the spout assembly into center 
opening in sink.
 > Install the wahsers and securing nut onto 
the spout body from underneath.
 MAL_57159/17.06.1 7 
en
87
65










