Installation & Assembly

7 Nm / 5 ft-lbs.
70
CAUTION
The hot valves can cause
scalding
> Avoid contact.
> Attach supply lines to shutoff valves.
NOTICE
Leakage through wrong
installed hoses
> Make sure that hoses are not kinked or
twisted during installation.
> Tighten the screws maximum torque
5 ft-lbs.
> Assemble the O-ring over the hoses and
then place the spout assembly into center
opening in sink.
> Install the wahsers and securing nut onto
the spout body from underneath.
MAL_57159/17.06.1 7
en
87
65