Brochure

CHANGING TO HIGH EFFICIENCY?
UTILIZE YOUR EXISTING VENT!
FasNSeal® 80/90 is a unique, patent pending, system that exhausts 90+ AFUE
condensing appliances with Type B atmospheric units, utilizing the existing vent.
Using your preexisting common vent, our cap improves the operation of both the remaining atmospheric appliance, and the
new condensing unit, while not disturbing nished space during installation.
Finally a solution when you need to deal with narrow lot lines, clearance to window and door openings, or when side wall
venting just isn’t practical.
CAME RA-R EADY L OGOTYPE – UL MARK FOR CANADA A ND THE U.S .
These Marks are regi stered by Underwriters Laboratories Inc.
The minimum height of the registered trademark symbol ® shall be 3/64 of an inch. When the overall di ameter of the
UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is not legibl e to the naked eye.
The font for all letter forms is Helvetica Condensed Black, except for the trademark symbol ®, which is
Helvetica Condensed Medi um. No other fonts are acceptable.
200-195C 20M/11/97
LISTED
MH6357
Features and Benets
• Takes up no additional building envelope space,
no additional building penetrations, and
does not disturb nished internal spaces.
• Simple install, compatible with
DuraVent PolyPro or FasNSeal vent system
for a listed and approved appliance connection.
Consult appliance manual for installation specics.
• Eliminates condensing sidewall building
moisture concerns and ue management.
• Keeps 90+ AFUE furnace ue and
termination warm, reducing icing.
• Allows superior vertical termination option.
• Oers superior ow performance with
smooth wall stainless inner wall and no ow
de-rate for ex.