Manual

ManualsBrandsDuraVent ManualsAccessories for airFasNSeal - Fixed Damper

FasNSeal- Supplemental

instruction- Fixed Damper

FasNSeal Fixed Blade Damper

Installation Instructions

A MAJOR CAUSE OF VENT RELATED FIRES IS

FAILURE TO MAINTAIN REQUIRED CLEARANCES

(AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS

OF THE UTMOST IMPORTANCE THAT FASNSEAL

BE INSTALLED ONLY IN ACCORDANCE WITH

THESE INSTRUCTIONS.

CAME RA-R EADY L OGOTYPE – UL MARK FOR CANADA A ND THE U.S .

These Marks are regi stered by Underwriters Laboratories Inc.

The minimum height of the registered trademark symbol ® shall be 3/64 of an inch. When the overall di ameter of the

UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is not legi bl e to the naked eye.

The font for all letter forms is Helvetica Condensed Black, ex cept for the trademark symbol ®, which is

Helvetica Condensed Medium. No other fonts are acceptable.

200-195C 20M/11/97

LISTED

Summary of content (4 pages)

PAGE 1
Installation Instructions ® FasNSeal- Supplemental instruction- Fixed Damper FasNSeal Fixed Blade Damper A MAJORC ACAUSE OF VENT RELATED FIRES IS ME R A -R E A DY L OG OT Y P E – UL MA R K F OR C A NA DA A ND T HE U.S . T hese Marks are registered by Underwriters L aboratories Inc. FAILURE TO MAINTAIN REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS. IT IS OF THE UTMOST IMPORTANCE THAT FASNSEAL BE INSTALLED ONLY IN ACCORDANCE WITH THESE INSTRUCTIONS.
PAGE 2
INTRODUCTION The purpose of the Fixed Blade Damper is to ensure optimum pressures through an appliance. The Damper will aid in the proper operation and efficiency of the appliance by preventing higher than desired draft readings. INSTALLATION • IMPORTANT: The max rated temperature for the fixed blade damper is 392°F (200°C). When the damper is installed, the entire FNS system is to be de-rated in maximum temperature to this value.
PAGE 3
with closing off the damper until the desired chamber pressure has been achieved. • At this point lock the damper blade in position and begin the burner set up as prescribed by the OEM.
PAGE 4
M&G DURAVENT LIMITED LIFETIME WARRANTY M&G DuraVent, Inc. (“DuraVent”) provides this limited lifetime warranty for all of its products with the exception of Ventinox® (lifetime), and PolyPro® (ten years). Subject to the limitations set forth below, DuraVent warrants that its products will be free from defects in material or manufacturing, if properly installed, maintained and used. DuraVent products are fully warranted if installed only by a professional installer.