Installation User Manual

3
WALL SUPPORTS/RE-SUPPORTS
Wall Supports and Re-Supports can be
used interchangeably (Fig. 3) to support the
chimney on vertical runs.
EXTENDED WALL
SUPPORT
MOUNTING
HARDWARE- #8
WOOD SCREWS
WITH WASHER
Table 1
DURATECH SUPPORT CHIMNEY HEIGHT SUPPORTED
5” 6" 7" 8"
ADJUSTABLE ELBOW STRAP EA ELBOW EA ELBOW EA ELBOW EA ELBOW
ADJUSTABLE WALL STRAP N/A N/A N/A N/A
EXTENDED ROOF BRACKET N/A N/A N/A N/A
EXTENDED WALL SUPPORT 20-FT 20-FT 20-FT 20-FT
RE-SUPPORT 20-FT 20-FT 20-FT 20-FT
ROOF SUPPORT
30’ TOTAL, 10’
ABOVE
30’ TOTAL 10’
ABOVE
30’ TOTAL 10’
ABOVE
30’ TOTAL 10’
ABOVE
Figure 5
EXTENDED ROOF BRACKET
Fig 5 shows installation of the re-designed
extended roof support. Once support rods
are at the desired length for your installation,
clamp the rods together as shown.
Figure 4