Instruction

14
Figure 19
Figure 20
REF FIG. 7 FOR MIN
DISTANCE BELOW
CEILING FOR
SUPPORT USED
18 INCH MIN
CLEARANCE FOR
SINGLE-WALL
STOVEPIPE
CAP ADJUSTABLE
FLASHING
CHIMNEY
SECTION
STORM
COLLAR
CHIMNEY
SECTION
FRAMED
OPENING
SQUARE
CEILING
SUPPORT BOX
OR REDUCED
CLEARANCE
SUPPORT BOX
REF FIG. 7 FOR
MIN DISTANCE
BELOW CEILING
FOR SUPPORT
USED
STOVEPIPE
CAP
ADJUSTABLE
FLASHING
CHIMNEY
SECTION
STORM
COLLAR
SQUARE
CEILING
SUPPORT BOX
OR REDUCED
CLEARANCE
SUPPORT BOX
CHIMNEY
SECTION
approximately a 60° angle with the chimney,
and with each other (Fig.18). Be sure that
there is at least 3” of overlap between the top
and bottom halves of the Adjustable Leg. In
order to secure Legs in proper position, there
is a hole provided in the outer leg where the
outer and inner halves overlap. Use a 1/4”
drill bit to drill through the inner leg at that
location. Use the nut & bolt provided to pin the
Adjustable Legs in position.
3. Install Roof Brackets: Mount the two Roof
Brackets where each of the Adjustable Legs
meets the roof, using (4) 1” roong nails or
screws per bracket. Seal the nail heads
carefully with a non-hardening, waterproof
sealant. Attach the bottom end of the
Adjustable Legs to the Roof Brackets using the
nuts & bolts provided.
UNOCCUPIED SPACE