Ventinox Product Catalog

Planning Your Installation
1
Verify the venting requirements of the appliance used. Choose the liner system appropriate
for the appliance and installation. Note: VFT is recommended for all fuels and VG is the best
choice for gas.
2
Refer to the Typical Installations for the type of liner installation similar to your situation.
Identify the needed parts for installation.
3
Venting for a fireplace requires the correct liner size for proper drafting. The size of the liner
should match the outlet size on the appliance.
4 Determined the length of the liner needed.
5
If connecting two or more appliances to a common vent, be sure to connect the higher BTU
appliance below the lower BTU appliance.
6
Make sure of a proper fit for the top plate of the relining to provide a secure, leak-proof
installation.
7
If a free standing appliance is used, select the vent or stovepipe pieces to connect from the
appliance to the liner (refer to the appropriate DuraVent Catalog Section).
8
Important! Check to be sure the installation complies with all local and national code
requirements, including clearances to combustibles. Contact the local building inspector for
permit requirements.
Ventinox | Chimney Relining
DuraVent | www.duravent.com
145