Spec Sheet
Specifications
Applications
DirectVent Pro is a unitized, coaxial
(concentric) venting system designed
for use with direct vent gas or propane
stoves, heaters, and replaces.
Materials and Construction
.020” aluminum inner wall.
.018” galvanized steel outer wall.
Painted outer walls made of laser-
welded .018” galvalume steel. Caps also
available in stainless steel and copper.
Outer pipe brings combustion air to
the appliance. Inner pipe exhausts ue
gases to the outside. Gaskets or sealants
not required (unless specied by the
appliance manufacturer).
Clearances
Specied by the appliance manufacturer.
Diameters
4” x 6 ⁄” and 5” x 8”.
Listings
DirectVent Pro, in combination with
the gas appliance, has been tested and
listed as a decorative gas appliance
system or as a direct vent heater system
by a major testing agency, such as UL,
CSA, Warnock Hersey, or OMNI. Check
with your appliance manufacturer for
approval.
DirectVent Pro
Stunning design and Engineered Excellence® utilizing state-of-the
art manufacturing. DirectVent Pro features tight inner connections
for superb performance, with no gaskets or sealants required
(unless specied by the appliance manufacturer). All black pipe
lengths, pipe extensions, and elbows feature laser-welded outer
wall seams for a sleek nish. Low-prole locks and no hems
or beads allow for a beautiful product that looks elegant in
any interior.
Engineered Excellence® with innovation and style...DirectVent
Pro. DuraVent's direct vent is specied exclusively by nearly every
major stove and replace manufacturer in the U.S. and Canada,
with the largest choice of termination caps for direct vent available.
DuraVent | www.duravent.com
183