Spec Sheet

Low-Profile Termination Cap
B
A
C
D
Use for vertical terminations only. Check the appliance
manufacturer’s instructions to determine which caps are
approved for use with their appliance. Available in aluminum and
stainless steel (S).
SIZE
ORDER #
STOCK # A B C D
4” x 6 ⁄”
46DVA-VC 810001360 8 ⁄” 6 ⁄” 3 ⁄” 12 ⁄”
4” x 6 ⁄”
46DVA-VC-S 810001361 8 ⁄” 6 ⁄” 3 ⁄” 12 ⁄”
5” x 8”
58DVA-VC 810001433 8 ⁄” 8” 7 ⁄” 14 ⁄”
5” x 8”
58DVA-VC-S 810001434 8 ⁄” 8” 7 ⁄” 14 ⁄”
Extended Vertical
Termination Cap
B
C
A
D
Use in extremely cold climates. Similar to the Low Prole
Termination Cap but taller in overall height to separate the
air intake vents from the exhaust area. Refer to the appliance
manufacturer’s installation instructions for requirements.
Available in aluminum.
SIZE
ORDER #
STOCK # A B C D
4” x 6 ⁄”
46DVA-VCE 810001362 16 ⁄” 6 ⁄” 3 ⁄” 10 ⁄”
5” x 8”
58DVA-VCE 810001435 8 ⁄” 8” 7 ⁄” 12 ⁄”
Aluminum Flex Length
Use 3” ex with the co-linear system and 4” ex with Conversion
Kits. See DuraFlex AL section for more information. Flexible .010”
thick 2-ply aluminum. Pricing for Aluminum Flex Length are listed
under DuraFlex AL.
SIZE LENGTH
ORDER #
STOCK #
3”
35’ 3DFA-35 810002988
4”
35’ 4DFA-35 810002998
Flex Coupling
3”
Use to join ex liner sections together. Pricing for Aluminum Flex
Length are listed under DuraFlex AL.
SIZE
ORDER #
STOCK #
3”
3DFA-FC 810002992
4”
4DFA-FC 810003000
Direct Vent | DirectVent Pro
800-835-4429 | DuraVent
198