Pellet Vent Product Catalog

Planning Your Installation
1


2



3



4



5



6


7


Design Recommendations
1‘ Minimum
above roof
penetration
The following design recommendations are intended only
as a general guideline to assist in the design and selection of
venting components for your installation. Always read and follow
M&G DuraVent Installation instructions before installing your
chimney system (found with the cap or support box). Installation
instructions can be viewed online at www.duravent.com, under
Catalogs and Instructions.
• Size the vent to meet the appliance manufacturer’s specications.
• Avoid long runs and excessive use of elbows. Refer to the
appliance manufacturer for minimum rise and maximum run
congurations for the venting system.
• Use an Appliance Adapter to ensure a proper connection to the
appliance. Seal adapter to appliance with high temperature sealant.
• Use a Single Tee with Clean-Out Tee Cap to facilitate easy
cleaning. It is recommended to use a tee o the back of
an appliance.
• In the United States and Canada, maintain the minimum 3”
clearance (air space) from vent pipe to combustibles. Use proper
support and bracing. Follow local building codes and have your
venting system inspected. Be re safe!
PelletVent | Multi-fuel Chimney
DuraVent | www.duravent.com
