Floor/Ceiling Mount Installation Manual

DURASTAR.COM
15
8. Mount the conduit installation plate to the chassis of the unit as shown below.
FLOOR MOUNTING
1. Before drilling the holes in the wall and mounting the unit, align the refrigerant pipes, drain pipe,
and signal cable connection points with the direction they will be drawn out and connected to the
outdoor unit through the wall hole (see Step 3: Drill Wall Hole For Connective Piping).
2. Drill four holes for the required wall anchors (field supplied).
3. Remove the side boards and the grille to access the mounting hooks.
Electrical box
Screws
Conduit
installation plate
Conduit
Side board
Mounting hooks
Hanging
s
crew bolts
Conduit
installation plate
Conduit
Conduit
installation plate
Screws
Chassis
4. Mount the indoor unit. Insert the wall bolts into the unit's mounting hook holes and secure in place.
The unit should not shift or wobble when completed.
5. Mount the conduit installation plate to the electrical box as shown below.