Owner's Manual - DRAS12F1B

DURASTAR.COM
13
SLEEP
The SLEEP feature is designed to decrease energy use while you sleep. This feature can only be
activated by remote control. The SLEEP feature is not available in FAN or DRY mode.
Press the SLEEP button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 2°F (1°C) after 1 hour, and will increase an additional 2°F (1°C) after
another hour. When in HEAT mode, the unit will decrease the temperature by 2°F (1°C) after 1
hour, and will decrease an additional 2°F (1°C) after another hour.
The SLEEP feature will turn off after 8 hours and the system will return to normal functioning.
Set
Temperature
1hr
1hr
Keep
Running
SLEEP Operation
Saves energy during sleep
In HEAT mode, temperature adjusts
(-1°C/2°F) per hour for the first two hours
In COOL mode, temperature adjusts
(+1°C/2°F) per hour for the first two hours
TURBO
Press the TURBO button to turn this feature on and off. The TURBO feature enables the unit to
reach the set temperature in the shortest time by automatically controlling the fan speed. This
feature is only available in COOL and HEAT modes.
SILENCE
Press the SILENCE / FP button to turn on and off the SILENCE feature. When the SILENCE feature
is activated, the compressor will slow and the indoor unit will turn the fan to low. This will reduce
the noise of the indoor unit to the lowest level. Due to the slow operation of the compressor, it
may result in insufficient cooling and heating capacity.