Installation Sheet - DRAS12F1B

DURASTAR.COM
13
STEP 2: MOUNT INDOOR UNIT
Depending on the model, fix the mounting plate or brackets to the wall with tapping screws and
mount the unit. The bottom of the unit can touch the floor or remain suspended, but the body
must be installed vertically. Refer to the diagrams below.
WARNING
Ensure that the indoor unit is completely level. Improper installation can cause the
drain pipe to back up into the unit and water leaks.
Mounting
plate
6 13/16”
(173mm)
3 11/16”
(94mm)
11 1/4”
(285mm)
7 11/16”
(195mm)
Mounting
brackets
7 11/16” (195mm)
Mounting plate
or brackets
Tapping
screw
Washer
<1/4”
(6mm)