Instructions / Assembly

A. Foundation
Note: It is important that these instructions
are followed step by step.
1
1. Assemble the channel (F01H) & (F02H) together
using 4
(S1) screws. Make 2 sets.
F01H
S1
F02H
Parts Needed:
(2) Foundation ‘U’ Channel  (F01H)
(2) F oundation ‘U’ Channel  (F02H)
(4) Foundation ‘L’ Angle  (F03)
(6) Foundation ‘U’ Channel  (F04A)
(6) Foundation ‘U’ Channel  (F05A)
(21) Foundation ‘U’ Channel  (F06A)
(18) Foundation ‘U’ Channel  (F07)
(4) Foundation ‘U’ Channel  (F03H)
(8) Foundation ‘U’ Channel Joint (F08)
(1) Base ‘U’ Channel  (B1LH)
(1) Base ‘U’ Channel  (B1RH)
(1) Base ‘U’ Channel  (B1LA)
(1) Base ‘U’ Channel  (B1RA)
(1) Base ‘U’ Channel  (B21)
(1) Base ‘U’ Channel  (B22)
(1) Base ‘U’ Channel  (B3LA)
(1) Base ‘U’ Channel  (B3RA)
(3) Base ‘U’ Channel  (EXTL)
(3) Base ‘U’ Channel  (EXTR)
Screws (S1)
All parts are clearly marked and care should
be taken to use the correct one.
Note
Over lapping
Parts Needed For Each Extension:
(3) Foundation ‘U’ Channel  (F06A)
(6) F oundation ‘U’ Channel  (F07)
(2) Foundation ‘U’ Channel  (F03H)
(4) Foundation ‘U’ Channel Joint (F08)
(1) Base ‘U’ Channel  (EXTL)
(1) Base ‘U’ Channel  (EXTR)
Screws (S1)
PART 1 : Assembling Shed With Extension Kit