Instructions / Assembly

40
1. Place facia panel (FPR) to front roof structure
right side. Line up the holes with roof structure and
fix the roof plugs with washer
(PPG). Use a hammer
(rubber mallet) to drive in roof pin (PIN).
See fig.1&2.
Front
D. Roof panels
(12) Roof Panels  (RP )
(2) F acia Panel Left  (FPL)
(2) Facia Panel Right  (FPR)
(6) Ridge Cover Small  (RRS)
(128) Roof Plug with Washer  (PPG)
(128) Roof Pin  (PIN)
(24) Sagging Support  (RS14A)
Parts Needed:
First insert all roof plugs with washers
to the panels (left & right) then drive
in the roof pins.
TIP
FPR
FPR
PPG
PIN
FPL
2. Place facia panel (FPL) to front roof structure
left side. Make sure
(FPL) overlaps on (FPR).
Repeat the same step 1.
Front
(2) Roof Panels  (RP )
(1) Ridge Cover Small  (RRS)
(58) Roof Plug with W
asher  (PPG)
(58) Roof Pin  (PIN)
(4) Sagging Support  (RS14A)
Parts Needed For each Extension: