Use and Care Manual

SPE
CME
BPF
BPB
SPE
S5
S6
CME
7. Slide the middle column (CME) into base pallet groove.
Use (S5) screws with (S6) washer to secure column to the
base pallet. See fig.
3
FCRE
BPB
SPE
Always place panels into frame at an angle
on top and slide in sideways and downward
for easy insertion.
6. Working from out side insert the side panel (SPE )
into the groove of front column (FCRE). Start at the
bottom of the panel at an angle then push into place.
Note
Make sure panels are right side up
with panel shingles facing down.
Check the stamped label on top.
of all panels.
Note
SPE
Make sure the side panel seat
inside the base pallet groove.
Note
SPE