Use and Care Manual

C. Roof panels
1. Place facia panel (FPE) to front roof structure.
19
First insert all roof plugs with washers
to the panels (left & right) then drive
in the roof pins.
TIP
fig. A
fig. B
Fig.1
Front
FPE
Fig.2
Front
FPE
Fig.3
Front
FPE
2. First put the roof plug washer on the roof plug.
Locate the holes in the facia panel through roof
structure and fix with roof plugs w/washers. Use a
hammer to drive in plastic pins (rubber mallet).See
figures 1, 2 & 3 for details. Repeat action to fix facia
panels on backside. See figures 4, 5 & 6
Fig.4
Back
FPE
Fig.5
Back
FPE
Fig.6
Back
FPE
(2) Roof Panels (RP )
(2) Facia Panel (FPE)
(1) Ridge Cover (RRE)
(34) Roof Plug Washer (PWS)
(34) Roof Plugs (PPG)
(34) Roof Pins (PIN)
(2) Sagging Support (RS14E)
Parts needed:
(2) Roof Panels (RP )
(1) Ridge Cover (RRE)
(14) Roof Plug Washer (PWS)
(14 Roof Plugs (PPG)
(14) Roof Pins (PIN)
(2) Sagging Support (RS14E)
(2) Back panel groove cover (PGC)
(1) Middle column groove cover (MCC)
Parts needed for each extension: