Use and Care Manual

13
Roof structure assembly
5. Insert 90 degree joint (RJ) into the (RS3E) U-channel Roof
support. Use a hammer to push in. Use (S1) screws to fix. Repeat
on other end of (RS3SB). See fig.
RS3E
RS3SB
4. Assemble (RS3E) & (RS3SB) with (S1) screws (2 sets).
See Fig.1.
6.Assemble the roof structure (RS5E) into
(RS6E) with 4 (S3) screws with nuts.
7.Assemble the roof structure (RS5E) into
(RS7E) with 4 (S3) screws with nuts.
Note
Refer Page No. 2 for
Overlapping Method
of (RS3E) & (RS3SB).
4a. For each extension add one (RS3SB).
RS3E
RS3SB
fig.1
RS3E
RJ
RJ
RS3SB
6a. For each extension add one (RS6E)
roof structure.
RS5E
RS7E
RS5E
RS6E
7a. For each extension add one (RS7E)
roof structure.