Use and Care Manual
6
13. Slide the middle column (CME) into the base pallet groove.
Use two (S5) screws with (S6) washer to secure column to the
base pallet (BPB). See Blowup.
14. Insert the side panel (SPE ) into the groove of
middle column (CME). Start at the bottom of the panel
at an angle then push into place.
12. Insert the side panel (SPE ) into the groove of
corner column (CCE). Start at the bottom of the panel
at an angle then push into place.
CCE
SPE
CME
SPE
BPB
CME
BPB
S5
S6
SPE
CME
SPE