Use and Care Manual

10a. Insert 90 degree joint (RJ) into the (RS3B) U-

channel Roof support. Use a hammer to push in. Use

(S1) screws to fix. Repeat on other end of (RS3SB).

See fig.2 and fig.3.

Add one (RS3SB) for each extension.

RS3B

RS3SB

RS3B

RS3SB

10. Assemble (RS3B) & (RS3SB) with (S1) screws (2 sets).

See fig 1.

fig.1

fig.2 fig.3

1 2&3

2&3

Note

Refer Page No.5 for

Overlapping Method

of (RS3B) & (RS3SB).

11. Assemble the roof structure (RS5B) into (RS6B) with 6 (S3) screws with nuts.

Make 2 sets.

Add one (RS6B) for each extension.

12. Assemble the roof structure (RS5B) into (RS7B) with 6 (S3) screws with nuts.

Make 2 sets.

Add one (RS7B) for each extension.

RS5B

RS6B

RS5B

RS7B