Use and Care Manual

ManualsBrandsDuramax Building Products ManualsStorage & OrganizationDuramate 8 ft. x 5.25 ft. Vinyl Shed

ALL PURPOSE VINYL STORAGE SHEDS

A Product of

USP

US POLYMERS INC

USP

Instructions for Assembly

Size 8’ x 6’

Foundation Kit

TOOLS YOU WILL NEED

• Cordless Drill - Philips Head

PART 1 :

8’ x 6’ Foundation

Assembly Instruction

PART 2 :

8’ x 6’ Foundation With One

Extension Assembly Insruction

Summary of content (7 pages)

PAGE 1
TM A Product of A L L P U R P O S E V I N Y L S T O R A G E S H E D S USP US POLYMERS INC Foundation Kit Instructions for Assembly Size 8’ x 6’ PART 1 : 8’ x 6’ Foundation Assembly Instruction PART 2 : 8’ x 6’ Foundation With One Extension Assembly Insruction TOOLS YOU WILL NEED • Cordless Drill - Philips Head
PAGE 2
PART 1 : 8’ x 6’ Foundation Assembly 1. Assemble the channel (F01B) & (F02B) together using 4 screws. Make 2 sets. Parts List F02B F01B Note: Check all parts prior to installation. CODE DESCRIPTION QTY F01B F02B F03 F04B F05B FOUNDATION ‘U’ CHANNEL FOUNDATION ‘U’ CHANNEL FOUNDATION ‘L’ ANGLE FOUNDATION ‘U’ CHANNEL FOUNDATION ‘U’ CHANNEL 2 2 4 6 6 ‘U’ CHANNEL ‘L’ ANGLE ACCESSORIES CODE DESCRIPTION QTY S1 DIA. 4.2 x 16mm. (5/32” x 5/8”) SHEET METAL SCREW 64 2.
PAGE 3
. Fix the L-angle (F03) to the channel at all the four corners to make a perfect frame. See Fig. F03 F03 F03 F03 4. Fix the channel (F04B) into the main frame as shown. See Fig. Note Make sure while assembling, the channel position should be as shown. F04B F04B F04B F04B 5. Fix the channel (F05B) into the frame with screws as shown. See Fig.
PAGE 4
6. Assemble the U-Channel bases on top of the foundation as shown in Figure. B22 B2B B1RB B21 F02B B1LB B2B F04B F01B S NT O FR E ID 7a. After completing the assembly of shed place exterior grade CDX 3/4” (19mm) plywood inside the foundation. See fig. OR 7b. After completing the assembly of the base U-channel fill the concrete upto the foundation top surface.
PAGE 5
PART 2 : 8’ x 6’ Foundation With One Extension Assembly 1. Assemble the channel (F01B) & (F02B) together using 4 screws. Make 2 sets. F02B Parts List Note: Check all parts prior to installation. F01B CODE DESCRIPTION QTY F05B F07 FOUNDATION ‘U’ CHANNEL FOUNDATION ‘U’ CHANNEL 3 6 ‘U’ CHANNEL 2. Assemble the channel (F04B) & Extension (F07) together with screws. Make 6 sets. ACCESSORIES F07 CODE DESCRIPTION QTY S1 DIA. 4.2 x 16mm.
PAGE 6
4. Fix the L-angle (F03) to the channel at all the four corners to make a perfect frame. See Fig. F03 F03 F03 F03 5. Fix the channel (F04B) & (F07) sub assembly into the main frame as shown. See Fig. Note Make sure while assembling, the channel position should be as shown. F07 F04B F07 F04B 6. Fix the channel (F05B) into the frame with screws as shown. See Fig.
PAGE 7
. Assemble the U-Channel bases on top of the foundation as shown in Figure. EXTR B22 B2B B21 B1RB EXTL F02B F07 B2B B1LB F04B F01B FR E ID S T ON 8a. After completing the assembly of shed place exterior grade CDX 3/4” (19mm) plywood inside the foundation. See fig. OR 8b. After completing the assembly of the base U-channel fill the concrete upto the foundation top surface.