Owners Manual

Always place panels into frame at an angle
on top and slide in sideways and downward
for easy insertion.
2. Insert the front side panel (FSP ) into the groove
of column (CDRB). Start at the bottom of the panel at
an angle then push into place.
0utside
S1
3. Slide corner column (CCB) into side panel
(FSP ) pushing the column to the side panel.
4. Working outside use (S1) screws to secure
column to bases (B1RB) and (B2B).
3
Note
Make sure panels are right side up
with panel shingles facing down.
Check the stamped label on top.
of all panels.
Note
CCB
B1RB
B2B
FSP
Inside
FSP
CDR
B1RB
CDRB
CDRB
FSP
FSP
CCB
Inside
FSP
CCB