Owners Manual

Parts Needed:

(4) Corner Column (CCB)

(1) Left Door Column  (CDLB)

(1) Right Door Column  (CDRB)

(4) Middle Column  (CMB)

(7) Side Panels  (SP )

(2) Front Side Panels  (FSP )

(2) Front Center Band  (CB1B)

(2) Side Center Band  (CB2B)

(1) Back Center Band short  (CB3B)

(1) Back Center Band long  (CB3XB)

(2) Front cross center band  (CB4B)

(1) Middle Joining Support (MJ)

(4) Center Band Fitting (FCB)

(1) Center Band Cover (CBC)

1. Slide right door column (CDRB) into the U-Channel

Base (B1RB) on the right side of the door. Line up the

pre-drilled holes on (CDRB) Column with pre-drilled

holes on U-Channel Base. Secure with two (S1) Screws

from inside. (See blowup detail fig.1)

4. Using a carpenters square, line up all corners.

Secure base to wood foundation using (S1) screws

Concrete foundation

B. Walls & Columns

All panels are clearly marked and care should be

taken to use the correct one.

B2B

fig.1

Inside

Note

B22

B1RB

CDRB

B1RB

Right

CDRB

4b. Shed or shed foundation should be placed

on concrete footing by use of anchor bolt and nut.

Using a carpenters square, line up corners. Align

U-Channel base, mark the concrete through the

holes in the base and drill concrete with 1/2” (dia.

12.5mm) concrete bit to accept anchor bolts to a

1 3/4” (44mm) depth. Replace base and secure

with 1/4” x 1 1/2” (M6 x 40mm) anchor bolts.

(not provided)