Owners Manual

F. Optional Ventilation Kit

ACCESSORIES

CODE DESCRIPTION QTY

VC VENTILATION COVER 2

VCP VENTILATION COVER PIN 4

VENTILATION COVER PIN

(VCP)

VENTILATION COVER (VC)

Outside

Optional ventilation kits can be installed on any of the wall

panels. However, we recomend mounting them on the top

of the shed’s back wall.

1. Place the ventilation cover (VC) as shown in fig.1.

Using a pencil, mark the two side hole locations.

3. Use a dia. 1/2” (12.5mm) drill bit to drill out as many

holes as desired behind the ventilation cover mounting

area as in fig.3.

2. On the marked hole locations, drill out two holes using

dia. 5/32” (4.2mm) drill bit as shown in fig.2. These holes

will be used to attach the ventilaion cover with the

ventilation cover pins (VCP).

4. Attach the ventillation cover (VC) with the ventilation

cover pin (VCP) as in fig.4.

5. Repeat the same to fix the second ventilation cover.

fig.1

fig.4

VCP

fig.3fig.2

Side View

TOOLS YOU WILL NEED

Power Drill

Dia 5/32” (4.2mm) drill bit

Dia 1/2” (12.5mm) drill bit