Owners Manual

D. Roof panels
(4) Roof Panels  (RP )
(2) Facia Panel Left  (FPLB)
(2) Facia Panel Right  (FPRB)
(2) Ridge Cover  (RRS)
(64) Roof Plugs w/Washer  (PPG)
(64) Roof Pins  (PIN)
(8) Sagging Support  (RS14B)
Parts Needed:
1. Place facia panel (FPRB) to front roof structure right side.
2. Line up the holes with roof structure and fix the roof plugs
w/washers. Use a hammer to drive in plastic pins (rubber
mallet).See figures 1, 2 & 3 for details. Place facia panel left
(FPLB) to the front roof structure left side. Make sure (FPLB)
overlaps on (FPRB). Repeat action to fix facia panels on backside.
See Fig. 4,5 & 6.
24
First insert all roof plugs with washers
to the panels (left & right) then drive
in the roof pins.
TIP
FPRB
Fig.3
FPLB
FPRB
Fig.1
Front
Fig.2
FPRB
Front
FPRB
Fig.6
FPLB
FPRB
Fig.4
Back
Fig.5
FPRB
Back
Front
Back