Owners Manual

11
Fig.1: Use
(S1) screw.
Fix (CB4B) to
(CDLB)
Fig.2: Use
(S1) screw.
Fix (CB4B) to
base (B1LB)
CDLB
CB4B
CB1B
B1LB
CB4B
21. Fix center band (CB4B) to (CDLB) and base (B1LB).
See Fig. 1, 2 and 3.
Fig.3: Fix the (EPS)
at the end of
(CB1B) & (CB4B).
22. Make sure the door opening between the door columns
(CDLB) and (CDRB) is 61 1/4” (1556mm). This will ensure a
perfect fit for the doors.
C. Roof Frame
Parts Needed:
(4) RS1 Roof Structure (RS1XB)
(4) RS2 Roof Structure (RS2B)
(2) RS3 Roof Structure (RS3B)
(2) RS4 Roof Structure (RS4XB)
(4) RS5 Roof Structure (RS5B)
(4) RS8 Roof Structure Support (RS8B)
(4) RS9 Roof Structure Support Short (RS9B)
(2) Middle Joining Support (MJ)
(2) RS10 Roof Structure Support (RS10B)
(1) RS11 Roof Structure Support Short (RS11B)
(1) RS12 Roof Structure Support Long (RS12B)
(1) Door Stopper Horizantal (DSH)
(1) Door Column Fitting Left (FDCL)
(1) Door Column Fitting Right (FDCR)
(4) Corner Column Fitting (FCC)
(4) Middle Column Fitting (FMC)
(4) 90 Degree Joint (RJ)
CDRB
CDLB
61 1/4”
Door Opening
CB1B
EPS
EPS
CB4B
CDLB
1556mm
CDLB
CCB
CB1B
Inside
CB4B
B1LB
1
3
2
S1
S1