Owners Manual

20. Attach the center band (CB1B) to door
column, corner column and center band (CB2B).
See figures 1 and 2.
18. Insert the side panel (FSP ) into the groove
of column (CCB). Start at the bottom with panel
at an angle then push into place.
19. Slide door column (CDLB) into the U-Channel
Base (B1LB) on the left side of the door. Line up
the pre-drilled holes on (CDLB) Column with pre-
drilled holes on U-Channel Base (B1LB). Secure
with two (S1) screws from the inside.
(see blowup detail).
10
Fig.1:Use (S1) screws.
Fix (CB1B) to
(FCB) and (CB2B).
Fig.2: Use (S1) screw.
Fix (CB1B) to (CDLB)
CDLB
CB1B
CDLB
CCB
CB1B
Inside
B1LB
2
1
Note
After completing the center band assembly, fully tighten
the four center band fittings (FCB) to the corner column
(CCB).
SP
Inside
CCB
B1LB
B1LB
CCB
FSP
FSP
CCB
B1LB
CDLB
B1LB
S1
CDLB
FSP
CB2B
CB1B
CCB
FCB
CDLB
S1 S1