User`s guide
-3-
FCC Compliance for American Users
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and if not installed and used in
accordance with instructions may cause harmful interference to radio communications.
Changes and modications could void the user’s authority to operate this equipment.
Safety Instructions
Please review the following safety instructions prior to using the printer:
1. The Toro is intended for indoor use only. Keep the printer away from humidity and
ultraviolet radiation.
2. Before you connect the printer to a power outlet, please check the voltage of the
power source.
3. When not in use, disconnect the printer from its power source.
4. To avoid electrical shock, DO NOT pour any liquid onto the printer or printer parts.
5. ONLY qualied service personnel should attempt to repair the printer.
6. Under any circumstances, DO NOT repair or adjust energized equipment without
supervision. For your protection, a person capable of providing rst aid must always
be present.
7. Obtain rst aid or medical attention immediately after an injury. Never neglect an injury,
no matter how slight it seems.
8. Toro supply may build a small static charge in static sensitive environments. Do not
operate Toro or any other electronic equipment near ammable materials.