User`s guide

-21-
12. Specications
Printer
• Type: Thermal Transfer
• Print Speed: up to 3 inches per second
• Resolution: 300 dots per inch
• Max. Print Width: 4.0"
• Max. Print Length: 30 inches using Label Writer software
• Unlimited length using DuraSuite software and EXT cut setting
Indicators & Buttons
• Indicators: Power, Printer Status, Supply Status, Battery Status
• Buttons: Power, Supply Feed, Keyboard Release, Screen Release, Battery Release
Communication Interface
• Communications: USB 2.0, Optional Ethernet Print Server Port
• Memory: 4GB Flash, 1GB SDRAM
Power Requirements
• Input Voltage: 24 VDC, 5A DuraLabel labelers have worldwide voltage capability
Software
• OpenOfce 3.2
• QLabel-IV 1.19 Barcode Software
• DuraSuite 1.5.0.8 Labeling Software
• Adobe Acrobat
Environment
• Operating Temperature: 41°F – 104°F (5°C – 40°C)
• Operation Humidity: 30% – 85%, non-condensing
• Storage Temperature: -4°F – 122°F (-20°C – 50°C)
• Storage Humidity: 10% – 90%, non-condensing
• Ventilation: Fan mounted on circuit board
Label Stock
• Type: Continuous, Black Mark & Die-Cut
• Width: 0.20 inch minimum, 4" maximum
Ribbon Supply
• Premium Resin
• Width: 106 mm (4.17 inch)
• Capacity: 360 ft. with 0.5 in. core diameter
Printer Body
• Dimensions: 13.5" wide, 10.25" deep, in. (L) x 6.7 in. (H) x 8.8 in. (W)
• 13.8 lbs (6.26 kg), excluding supplies
Toro specications are subject to change without notice.