User`s guide
-16-
8. Advanced Functions
Using the USB Drive
To copy non-program les, such as images, templates, or spreadsheets, onto the Toro, rst
load the les onto a USB drive. Insert the drive into any unused USB port on the side of the
Toro. After a few moments, a button labeled D: will appear on the Toro Toolbar. Click on this
button to view the contents of the USB drive. Drag and drop les to the desired location on
the Toro using the folder tree at the left of the window.
NOTE: The only user-rewriteable portions of the built-in hard drive are the My Documents folder
and its subfolders. This is the default location for all user functions, including saving new or modied
templates, images, or other documents. Files changed, deleted, moved, or otherwise modied in other
portions of the le structure will automatically revert to their original state when the Toro is rebooted.
NOTE: To speed up USB recognition select the How To’s document under Programs in the Toro toolbox.
Touchscreen Calibration
Over time your Toro touchscreen may need to be calibrated to improve touch performance.
To calibrate the Toro touchscreen select Control Panel in the Programs menu in the Toro
toolbar. Then select Touch Calibration. Follow the instructions by selecting the X in each
screen corner until it beeps. Your screen will then be calibrated for optimum touch accuracy.
Installing Programs
The Toro cannot install or run user programs. Only manufacturer-supplied upgrades can
be installed on the machine. The Toro printer can be slaved to an external software source
through the optional Ethernet Print Server Port and USB-B port.
Changing the Desktop Wallpaper
To change the Desktop image, insert a USB drive with the desired image into any unused
USB port. Click on the D: button in the Toro toolbar. Select the image le in the window that
appears, and drag it to the My Symbols folder on the Toro.
From the Toro toolbar, select Programs then Control Panel. In the window that appears,
select Display. In the new window, select the Desktop tab, then Browse. Navigate to the My
Symbols folder, select the desired image, and select Open. Select OK to make the change.
Password Protection
The Toro has a password protection option. To enable, from the toolbar, select Programs
then Password Control, Add User and complete by clicking Enable Lock. After a shutdown
or return from the screensaver, a logon prompt will display. Once a user is added, several
other password options appear on the Toolbar. Under Password Control the following items
are shown: • Add User • Delete User
• Change Password • Disable Station Lock (toggle - disable/enable)
To disable the station lock, select the 4th bullet above. To immediately lock the station,
select Programs then Lock Station Now.
In case of forgotten password, contact Graphic Products at 1-800-788-5572.