User`s guide

45
800.788.5572 DuraLabel.com
SPECIFICATIONS
12.4 Power Requirements
Input Voltage: Switching power, 100 – 240 VAC, 50 – 60 Hz
Output Voltage: 24 VDC
Circuit Protection: 3.75A maximum
12.5 Environment
Operating Temperature: 41º F – 104º F (5º C – 40º C)
Operation Humidity: 25% – 85% non-condensing
Storage Temperature: -4º F – 122º F (-18º C – 50º C)
Storage Humidity: 10% – 90% non-condensing
Ventilation: Free air movement
12.6 Label Supply
Type: Continuous, B Mark and Die-Cut
Width: 0.5" – 4"
Gap Height: 0.12"
B Mark Height: 0.12"
12.7 Ribbon Supply
Type: Wax, Wax/Resin, Resin
Capacity: 984' with 1" core
12.8 Printer Body
Dimensions: 7.4" (H) x 8.4" (W) x 12.4" (L)
Copyright Information
No part of this guide, including the products and software described in it, may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language in any form or by any means, except as documentation kept by the
purchaser for backup purposes, without the express written permission of Graphic Products, Inc.
Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their
respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Specifications and other content contained in this guide are furnished for informational use only and are subject to change at
any time without notice, and should not be construed as a commitment by Graphic Products. Graphic Products assumes no
responsibility or liability for any errors or inaccuracies that may appear in this guide.