User`s guide

DuraLabel.com 800.788.5572

LOADINg ThE PRINTER

G. Grab the ribbon leader that is hanging down.

H. Pull it toward you and underneath the ribbon mechanism and print head, up to

the front hub and ribbon rewind spindle.

FIGURE 12 Ribbon supply (4.3") being pulled down

FIGURE 13 Ribbon supply (4.3") being pulled up to the

ribbon rewind spindle

NOTE: The ribbon should rotate with ease as you unroll it.

I. Tape the entire width of the end of the ribbon leader to the ribbon rewind

spindle’s paper core, placing one piece of tape horizontally.

J. Roll the ribbon rewind spindle (top side of spindle moving away from you) to

secure the ribbon supply and eliminate wrinkles, fingerprints or flaws. Your ribbon

supply should now be loaded.

NOTE: The ribbon-loading process is the same for all ribbon sizes in steps D – J.

Figures 7, 8, 9, 12, 13, 14 and 15 illustrate 4.3" ribbon supply.

FIGURE 14 Ribbon supply (4.3") taped to ribbon

rewind spindle

FIGURE 15 Ribbon supply (4.3") rolled tight