Specifications

3.4 Instructions to Top Cover Operation

Please take care when opening or closing the printer’s top cover by carefully following

these instructions.

To Open:

1. When facing the front of the printer, pull the cover release levers on both sides of

printer towards you.

2. Lift the top cover slowly.

There are two stop positions for the top cover. Position 1 and 2 are indicated on the

label below.

Note: To hold the cover open at position 1, you must lift the cover higher than the

stopping point at position 1 and gently lower the cover to stopping point 1.

Do not let the cover free fall!

3. Fully open the top cover and gently lower it to stop position 2.

Fig. 1 Top cover support is fixed at position 2