Specifications

Fig. 7 Pull the lever to open the cover
3. Place a roll of label stock onto the center of the paper roll mount.
4. Feed the label stock, printing side face up, under the Teflon bar and the label
guides and pass over the platen, then feed through the cutter.
5. Adjust the green center-biased label guides to slightly touch the edges of the
label stock.
6. To close the printer top cover, lift the cover until it stops then use both hands to close
the cover gently. Close the printer top cover slowly and make sure the cover locks
securely.
Note:
1. Make sure your hands are not inside the printer when closing the top cover.
2. Do not let the top cover free fall.
3. Failure to securely close and lock the cover will result in poor print quality or a
flashing LED and the inability
to print.
Fig. 8 Label installation (II)
Lower Cover
Label Roll Mount
T
eflon Bar
Top Cover
Release Lever
Printer Top Cover
Support Bar
Adjustable
Label Guides
6
Pull
release
lever
forward
Cutter
Platen Roller