Specifications

Fig. 5 Ribbon installation (II)
3.3 Loading Label Stock
The ribbon and various print media for the DuraLabel
®
PRO 300 have been optimized
for compatibility and print quality. Only authorized supplies from Graphic Products
will print correctly in the DuraLabel
®
PRO 300.
1. Insert a 1” label spindle into a roll of label stock.
Fig. 6 Label roll installation (I)
2. Open the printer’s top cover by releasing the turquoise levers located on each side
of the printer and lifting the top cover. A top cover support at the rear of the printer
will hold the printer top cover open.
Ribbon Rewind
Spindle with
Paper Core
Rear Hub
Ribbon
Leader
Ribbon Supply Spindle
Label Stock
1
" Label Spindle
Fixed Tab
Printing Side
Face Up
5