Specifications

Make sure both the ribbon access window and the printer top cover are closed when
powering up the printer.
1. Push down on the ribbon access window to unlock and open the ribbon cover.
2. Place a paper core onto the ribbon rewind spindle.
3. Mount the ribbon rewind paper core on the front hubs.
4. Install a ribbon on the ribbon supply spindle.
5. Mount the ribbon supply spindle on the rear hubs.
6. Open the top cover of the printer.
7. Pull the ribbon from the ribbon supply roll under the print head and attach it to
the ribbon rewind paper core. (See diagram inside back of printer)
8. Rotate the ribbon rewind paper core by turning the spindle flange with your
thumb until the ribbon rewind core is completely wrapped with the black
section of the ribbon.
9. Close the top printer cover and ribbon cover.
Fig.4 Ribbon installation (I)
Paper Core
Ribbon Spindle
Flange of Ribbon
Spindle
Front Hub
Ribbon Access
Window
4
Ribbon Cover
Rear Hub
Flange of Ribbon
Spindles fit on right
side of printer