Specifications
6.2 Print Quality
Continuous feeding labels
The printer setting may go wrong. Please do the Initialization and Gap/Black
Mark Calibration. (See pages 18-20 of the User’s Guide).
No print on the label
Is the label or ribbon loaded correctly? Follow the instructions in
Loading the Label Stock (See section 3.3) or Loading Ribbon.
Has the ribbon run out? Follow the instructions in Loading the Ribbon
(See section 3.2).
Poor print quality
Top cover is not closed properly. Close the top cover completely and make sure the
right side and left side levers are latched to top cover properly.
Clean the thermal print head with a cleaning swab.
Adjust the print density setting and or speed setting.
(See page 20 of the User’s Guide).
15