User`s guide

SPECIFICATIONS
Printer
▪ Type: Thermal Transfer
▪ Print Speed: Selectable speeds of 2 and 3 inches per second
▪ Resolution: 300 DPI
▪ Max. Print Width: 4 in.
▪ Max. Print Length: 40 in.
▪ Ribbon Capacity: 984 ft.
Indicators & Buttons
▪ Indicators: PWR., ON-LINE, ERR.
▪ Buttons: POWER & FEED
Communication Interface
▪ Communications: USB v1.1, RS-232C (max baud rate 19200 bps), & Centronics
▪ Memory: 2 MB Flash memory 8 MB DRAM
Power Requirements
▪ Input Voltage: Switching power, 100-240 VAC, 50-60 Hz
▪ Output Voltage: 24 VDC
▪ Circuit Protection: 3.75A maximum
Environment
▪ Operating Temperature: 41°F - 104°F (5°C - 40°C )
▪ Operation Humidity: 25% - 85% non-condensing
▪ Storage Temperature: 104°F - 140°F (40°C - 60°C )
▪ Storage Humidity: 10% - 90% non-condensing
▪ Ventilation: Free air movement
Label Stock
▪ Type: Continuous & Die-Cut
▪ Width: 0.5 in. - 4 in.
▪ Gap Height: 0.12 in. min.
▪ Black Mark Height: 0.08 in. min.
▪ Black Mark Width: 0.31 in. min.
Ribbon Supply
▪ Type: Wax, wax/resin, resin
▪ Capacity: 300 m. with 1 in. core
Printer Body
▪ Dimensions: 7.4 in. (H) x 8.4 in. (W) x 12.4 in. (L)
For more specifi cations, please see pages 16-17 of the DuraLabel
®
LabPRO Printer Manual
located on the DuraLabel
®
LabPRO CD.
-60-