User`s guide

14. SYMPTOM: Streaking occurs while printing.
a. Possible Cause: Ribbon was installed with too much slack or it was not
centered, creating a crease in the ribbon.
Solution: Tighten the slack and eliminate all creases in the ribbon.
b. Possible Cause: Printer requires service.
Solution: Contact Graphic Products.
15. SYMPTOM: Speckling occurs while printing.
a. Possible Cause: Print head requires cleaning.
Solution: Use an alcohol cotton swab to clean the print head.
b. Possible Cause: Dust or other surface debris make it difficult for the resin to
stick to vinyl or improperly stored.
Solution: Use only Graphic Products vinyl and store in dust-free conditions.
Contact Graphic Products if problem persists.
-59-