User`s guide

Platen Roller
1. Remove the platen roller by squeezing the black tabs on either side of the platen
roller and lifting up.
2. Open a cleaning swab and place the swab between your forefi nger and thumb.
Squeeze swab until it snaps. Alcohol will be distributed to the cotton side of the
swab.
3. Run the swab back and forth several times across the Platen roller to remove any
buildup.
4. Replace platen roller in printer
5. Give the Platen roller a couple minutes to dry, then reload your ribbon and supply.
6. Your DuraLabel
®
LabPRO is now cleaned and ready for use.
The DuraLabel
®
LabPRO should be cleaned regularly to maintain optimal
performance. The print head, cutter mechanism, and platen roller should be cleaned
with alcohol swabs to remove buildup of adhesive, dust, and other substances.
Always turn the printer OFF before cleaning, performing maintenance, or loading
supplies.
Black Tabs
Fig. 6
Platen Roller
Please see the DuraLabel
®
LabPRO Cleaning Video located at
www.duralabel.com/duralabel-pro-300/dlp300-support.php for proper step-by-step
procedures.
NOTE
-53-