User`s guide

Cutter
1. Open the DuraLabel
®
LabPRO top cover.
2. Rewind any supply that may be loaded away from the cutting mechanism.
3. Open a cleaning swab and place the swab between your forefi nger and thumb.
Squeeze swab until it snaps. Alcohol will be distributed to the cotton side of the
swab.
4. Run the swab back and forth several times across the cutting mechanism to
remove any buildup of labeling adhesive.
Fig. 4 Cutter (cutting blades are located at the printed label opening)
Fig. 3 Cutter Mechanism (detachable face in front of printer)
-51-