User`s guide

Black Mark Label Instructions
Black Mark Calibration
In order to print labels with black marks, the label stock needs to be calibrated. To
do so, with the printer power OFF, hold the FEED button down while turning ON the
printer. Release the FEED button while it blinks green-amber.
The LED color will flash as follows: red (5 blinks) amber (5 blinks) then green and
amber will blink alternately. Once this process is complete follow the "Driver Settings
for Black Mark Labels" to change the driver settings.
Driver Settings for Black Mark Labels
For black mark labels with the 1/8" black mark, the settings on the Stock tab should
be as follows: “Method” set to Thermal Transfer, the “Type” set to Labels With
Marks, “Mark Height” set to 0.12 (default) and “Mark Offset” to 0 (default.)
-26-