User`s guide

Fig. 2 Smooth, ﬂ at-side

Cut-out

opening

Fig. 4 Tape Guide with smooth, ﬂ at-side up, grooved-side down with cut-out

opening on the left side

Fig. 5 Tape Guide being ﬁ tted over the left Adjustable Label Guide

Fig. 3 Grooved-side

3. When facing the front of the printer, hold the Tape Guide in hand with the smooth,

flat-side facing up and the cut-out opening oriented on the left side.

NOTE:

Move the Adjustable Label Guides inwards, leaving about a 2″ gap for easy installation.

4. Slip the cut-out opening over the left, smallest Adjustable Label Guide , but do not

press all the way down into place.

-15-