User`s guide

TAPE GUIDE INSTALL INSTRUCTIONS
To Use Tape Guides
The following are instructions on how to install Tape Guides. Tape Guides are
required for 1/2" label stock and shrink tube sizes 3/8" and smaller. Larger vinyl
and shrink tube are adequately held in place by the Adjustable Label Guides.
1. Load shrink tube or 1/2" label stock into the DuraLabel
®
LabPRO and thread it
through the cutter. (See pages 11-13 of the User's Guide, section “Load Label
Stock”)
2. Find the corresponding Tape Guide to match the size of shrink tube or label stock
which is loaded.
Fig. 1 Shrink tube supply (3/8" size) loaded
White - 1/2"
(for vinyl only)
Black - 1/8" Blue - 3/16" Green - 1/4" Yellow - 3/8"
Adjustable
Label Guides
Left Adjustable Label Guide
Right Adjustable
Label Guide
-14-