User`s guide

11. Tape the entire width of the end of the Ribbon Supply leader to the paper core of
the Ribbon Rewind Spindle.
12. Roll the Ribbon Rewind Spindle (top side of spindle moving away from you) to
secure the Ribbon Supply and eliminate wrinkles, fingerprints or flaws.
Your Ribbon Supply should be loaded.
Fig. 13
Ribbon Supply (4.3") taped to Ribbon Rewind Spindle
Fig. 14 Ribbon Supply (4.3") rolled tight with dull-side facing out (dull-side of
ribbon should face label stock)
-9-