User`s guide

8. Open the Printer Cover by pulling forward the Printer Cover Release Levers on the
sides of the printer.
9. Grab the Ribbon Supply leader that is hanging down.
10. Pull it towards you and underneath the Ribbon Mechanism and Print Head, up to
the Front Hub.
NOTE:
The ribbon should rotate with ease as you unroll it. The dull side of the ribbon should face
down towards the label stock.
Fig. 11 Ribbon Supply (4.3") being
pulled down and underneath
Fig. 12 Ribbon Supply being pulled up to the Ribbon
Rewind Spindle
Fig. 10 Printer Release Lever being pulled forward
-8-