User`s guide

NOTE: You may need to use trial and error to determine which is the best setting to adjust to based on the

type of label or sign being printed.

Set Right Adjustable Pressure Knobs:

For wrinkles on the left side of the label when printed: Set the two right Adjustable

Pressure Knobs.

1. Press down on the far right Adjustable Pressure Knob and while holding down,

turn the Adjustable Pressure Knob clockwise to the desired number

(amount of

pressure). (See page 51, Fig 7 & Fig 8 of the User's Guide for demonstration)

2. Press down on the second-to-far right Adjustable Pressure Knob and while holding

down, turn the Adjustable Pressure Knob clockwise to the same number as the

far left Adjustable Pressure Knob was set to.

Label dispensed

out this end ﬁ rst

Front of printer

on this end

Fig. 10 Front view of printer with

the two left Adjustable

Pressure Knobs set

Fig. 9 Top-down view of the printer

with the two left Adjustable

Pressure Knobs set

Two Right Adjustable Pressure Knobs

Fig. 11 Ribbon Wrinkled on Left Side

-56-